AVK MAGNUS™ PE BALL VALVES, GAS MOP10 / WATER PN16
PE ball valve AVK MAGNUS™ with stem extension and two purge points, for use in the isolation of water and gas on domestic, commercial and industrial premises.
AVK has an extensive range of internationally approved PE ball valves, ranging as of OD25 up to OD180mm. Made from high performance PE100-RC material AVK PE ball valves offer excellent resistance to slow crack propagation and can be welded to all PE100 and PE80 pipes making the valve an integral part of the fully welded leak-free pipe system. Full bore design ensures a reduced pressure drop and greater flow through the valve. All spigot ends can be delivered with double spigot length option, allowing for a second electro fusion weld if needed.
| 變種 85/50-008 | |
|---|---|
| 連接 | PE Pipe Ends |
| 材料 | Polyethylene (PE) |
| DN 範圍 | DN50 - DN150 |
| PN類別 | PN 16 |
| 關閉方向 | Clockwise to Close |
產品特點
- Robust design, suitable for most harsh environments
- Material selection body and spigot (PE100-RC) offering excellent resistance to crack propagation
- Seat, ball and grease combination ensuring low operating torques and avoids sticking over time
- Selected ball material offering good scratch resistance
- Grease with minimal wearing off from the lubricated surfaces for improved long term performance
- With stem extension and purge points to use valve for by-pass or purging of pipeline
- ASSIST (QR-code) asset management to record, track and identify where valves are located and ensure traceability at all times
- Seat compression of large sealing surfaces precisely set via separate pre-assembly
- Flexible spindle shaft to ensure equal compression around the O-rings when loaded by internal pressure
- Fully automated socket welding of stem extension and purge pipes for optimal reliability
- Threaded metal bush in purge valve spigot for durable and secure connections
- BSP thread 1" suitable for universal flares
- Stainless steel lever for easy operation of purge valves
- Delivered with pressure retaining plug
下載
參考編號 和尺寸
| AVK ref. no. | D4 mm |
D6 mm |
D1 mm |
D2 mm |
D3 mm |
D5 mm |
D7 mm |
D8 mm |
D9 mm |
D10 mm |
D11 mm |
D12 mm |
D13 mm |
D14 mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 85-063-501200400522 | 63 | 50 | 715 | 810 | 205 | 5.8 | 40 | 49.6 | 25.5 | 170 | 635 | 278 | 700 | 730 | 7.6 |
| 85-090-502200400522 | 90 | 74 | 710 | 855 | 205 | 8.2 | 40 | 49.6 | 25.5 | 170 | 645 | 280 | 710 | 755 | 10.9 |
| 85-110-501200400522 | 110 | 86 | 715 | 875 | 205 | 10.0 | 40 | 49.6 | 25.5 | 170 | 645 | 280 | 710 | 765 | 12.8 |
| 85-125-501200400522 | 125 | 86 | 710 | 875 | 205 | 11.4 | 40 | 49.6 | 25.5 | 170 | 635 | 280 | 700 | 765 | 13.6 |
| 85-160-501200400522 | 160 | 120 | 795 | 1045 | 205 | 14.6 | 40 | 49.6 | 25.5 | 170 | 750 | 350 | 815 | 895 | 25.8 |
| 85-180-501200400522 | 180 | 120 | 795 | 1045 | 205 | 16.4 | 40 | 49.6 | 25.5 | 170 | 740 | 350 | 805 | 895 | 26.6 |
組件
| 1. | Purge valve | PE 100-RC |
| 2. | Extension pipe | PE 100 |
| 3. | Support bracket | HDPE |
| 4. | Profile | Stainless steel |
| 5. | Purge pipe | PE 100 |
| 6. | Connector | PA GF |
| 7. | O-ring | NBR rubber |
| 8. | Lock pin | PVC |
| 9. | Body | PE 100-RC |
| 10. | Stem | POM |
| 11. | Support ring | PE 100-RC |
| 12. | Ball seat | NBR rubber |
| 13. | Seat retainer | PE 100-RC |
| 14. | Ball | POM |
| 15. | Connector | PA GF |
| 16. | Bearing ring | PA 6 |
| 17. | O-ring | NBR rubber |
| 18. | Plug | POM |
| 19. | O-ring | NBR rubber |
| 20. | Threaded bush | Stainless steel AISI 304 |
| 21. | Support bracket | HDPE |
| 22. | Bearing ring | PA 6 |
| 23. | O-ring | NBR rubber |
| 24. | Spigot | PE 100-RC |
| 25. | Lever | PA GF |
| 26. | Screw | Steel, galvanized |
標準
- EN 12201-4, EN 1555-4, GB15558.3, ISO4437-4
相關的系列類型變種
AVK MAGNUS™ PE BALL VALVES, GAS MOP10 / WATER PN16
Fusible ends, full bore on all body sizes, OD25 - OD180
AVK MAGNUS™ PE BALL VALVES, GAS MOP10 / WATER PN16
Fusible ends, full bore on all body sizes, OD63 - OD180
